Airlay homogeneous safety vinyl sheet rated P3 / R10, 2 mm on 2 m rolls, with grit through the full thickness. 14 plain and chip colours, 15 year commercial warranty.
SuperSafe R10 is part of Airlay’s SuperSafe collection, a homogeneous safety vinyl sheet for commercial spaces such as healthcare, education, offices, retail and hospitality. It is rated P3 wet pendulum and R10 oil-wet under AS 4586, and classed for very heavy commercial use.
Silicon carbide, aluminium oxide and quartz run through the full thickness, so the slip resistance lasts as the surface wears. The sheet is flexible enough to be coved up walls and around corners, and a cellulose backing helps it bond to the subfloor.
It comes on 2 m wide rolls in 14 colours: seven plain and seven chip finishes, from Glacier White and Fog Grey to Sky Blue and Jet Black, with heat welded seams, and is backed by Airlay’s 15 year commercial warranty.
| Range | SuperSafe R10 |
| Brand | Airlay |
| Type | Homogeneous safety vinyl sheet with enhanced slip resistance (EN 13845) |
| Use classification | Commercial 34 (very heavy); light industrial 43 (heavy), ISO 10874 |
| Thickness | 2.0 mm |
| Roll size | 2.0 m wide x 20 m long (40 m² per roll) |
| Weight | 2.5 kg/m² |
| Surface | Silicon carbide, aluminium oxide and quartz through the full thickness, so the grip lasts as the surface wears |
| Backing | Cellulose backing |
| Slip resistance (AS 4586) | P3 wet pendulum; R10 oil-wet |
| Wet barefoot (AS 4586 C) | Not rated |
| Fire (floors) | Critical radiant flux ≥ 4.5 kW/m² (EN ISO 9239-1); Bfl-s1 (EN 13501-1) |
| Anti-static | ≤ 2 kV (EN 1815) |
| Wear resistance | ≤ 10% of particles lost over 50,000 cycles (EN 13845) |
| Residual indentation | ≤ 0.10 mm (EN ISO 24343-1) |
| Castor chairs | Pass (EN ISO 4918) |
| Chemical resistance | Good (EN ISO 26987) |
| Indoor air | TVOC emissions approved (EN 16516); phthalate free |
| Installation | Fully glued with Airlay Universal Vinyl Adhesive, seams heat welded, to AS/NZS 1884; can be self-coved up the wall |
| Warranty | 15 year commercial warranty from Airlay (conditions apply) |
| Colours | 14 |
Every installation starts with a free measure at your home. We check the subfloor, test concrete and timber subfloors for moisture free of charge, and send your written quote within two working days of the measure. Our installation team then lays your new floor.
The manufacturer's installation guide for SuperSafe R10 sets out the subfloor, expansion gap and laying requirements.
Book a free measure and quote, or if you are laying it yourself, read our advice for DIY installers.
Follow the care and maintenance guide for SuperSafe R10 to keep your floor looking its best and to protect the warranty.
For general tips, read our floor care guide.
Product: 15 year commercial warranty from Airlay (conditions apply), from the manufacturer.
Installation: our 2 year installation warranty covers the installation work we do.
See our warranty page for more about warranties.
Airlay gives it a 15 year commercial warranty that it will not wear through and will be free from manufacturing defects, as long as it is installed to AS 1884 by a professional installer and cleaned the way Airlay recommends. Our installation work is also covered by our 2 year installation warranty.
They are the same floor with three levels of grip. R10 is rated P3, R11 is rated P4 and R12 is rated P5 in the wet pendulum test. R10 comes in 14 colours (plain and chip), R11 in 4 plain colours and R12 in 3 plain colours.
Plain colours are a solid, even shade. Chip colours have small contrasting flecks through the sheet. Both have the same slip rating.
It depends on the area and how it is used, and your designer or building specification may set a minimum. Tell us where the floor is going and we will match a product to it before you commit.
Yes. Visit our Penrith, Campbelltown, Hornsby or Logan showroom, or book a free measure and quote and we will bring samples to your site.
Four showrooms across Sydney & Brisbane
