Commercial safety vinyl sheet rated P3 / R10, 2 mm thick on 2 m wide rolls, with silicon carbide, quartz and aluminium oxide for grip. Anti-static, 15 year commercial warranty.
Safeguard R10 is part of the Safeguard collection, a commercial safety vinyl sheet made for higher-risk areas such as commercial kitchens, hospitality venues, retail spaces and light industrial settings. R10 has the lowest of the three slip ratings.
A blend of silicon carbide, quartz and aluminium oxide gives long-lasting slip resistance, and the PVC wear layer resists dents and gouges. It is built for areas exposed to chemicals, is anti-static (EN 1815) and comes on 2 m wide rolls, so there are fewer seams.
It is backed by a 15 year commercial warranty.
| Range | Safeguard R10 |
| Brand | Royal Floors |
| Type | PVC floor covering with particle-based enhanced slip resistance (EN 13845) |
| Use classification | Commercial 34 (very heavy); light industrial 43 (heavy), ISO 10874 |
| Thickness | 2.0 mm |
| Roll size | 2.0 m wide x 20 m long (40 m² per roll) |
| Weight | 2.5 kg/m² |
| Surface | Embossed, with silicon carbide, quartz and aluminium oxide |
| Slip resistance (AS 4586) | P3 wet pendulum; R10 oil-wet |
| Fire (floors) | Critical radiant flux ≥ 4.5 kW/m², smoke development rate ≤ 750 %.min (AS ISO 9239-1) |
| Anti-static | ≤ 2 kV (EN 1815) |
| Chemical resistance | Good |
| Installation | Full stick with hard-set adhesive, sheets reversed, seams heat welded or seambonded, to AS/NZS 1884 |
| Coving | Can be coved up the wall on a cove fillet |
| Low VOC | Compliant with Green Building Council low VOC emission rates |
| Warranty | 15 year commercial warranty, available on request (conditions apply) |
Every installation starts with a free measure at your home. We check the subfloor, test concrete and timber subfloors for moisture free of charge, and send your written quote within two working days of the measure. Our installation team then lays your new floor.
The manufacturer's installation guide for Safeguard R10 sets out the subfloor, expansion gap and laying requirements.
Book a free measure and quote, or if you are laying it yourself, read our advice for DIY installers.
Follow the care and maintenance guide for Safeguard R10 to keep your floor looking its best and to protect the warranty.
For general tips, read our floor care guide.
Product: 15 year commercial warranty, available on request (conditions apply), from the manufacturer.
Installation: our 2 year installation warranty covers the installation work we do.
See our warranty page for more about warranties.
It has a 15 year commercial warranty, available on request (conditions apply). Our installation work is also covered by our 2 year installation warranty.
They are the same floor with three levels of grip. R10 is rated P3, R11 is rated P4 and R12 is rated P5 in the wet pendulum test, with R10, R11 and R12 oil-wet ratings. The higher the rating, the more grip the floor gives when it is wet or oily.
Yes. The maker names commercial kitchens as an ideal use for the Safeguard collection, and the care guide covers cleaning grease with a low alkaline cleaner.
It depends on the area and how it is used, and your designer or building specification may set a minimum. Tell us where the floor is going and we will match a product to it before you commit.
Yes. Visit our Penrith, Campbelltown, Hornsby or Logan showroom, or book a free measure and quote and we will bring samples to your site.
Four showrooms across Sydney & Brisbane
